BEST SELLING GEAR VR LENS MOD ADAPTER KIT W/ FINGER GRIPS OG VIVE / PRO / COSMOS

Description

** Please be aware of the
counterfeit item
being
sold as a genuine DCU product found in the links below:
https://www.ebay.com/itm/Best-Selling-Gear-VR-Lens-Mod-Upgrade-Kit-For-Vive-Cosmos-Cosmos-Elite/233830479224?hash=item367161f578:g:ApQAAOSwk2lf4Vvn
https://www.ebay.com/itm/Best-Selling-Gear-VR-Lens-Mod-Upgrade-Kit-For-Vive-Cosmos-Cosmos-Elite/233869197044?hash=item3673b0bef4:g:UHoAAOSwDXlf4Vvo
Since 2016
ORIGINAL DCU
TM
DESIGNED ADAPTERS SET
DESIGNED FOR
HTC
VIVE PRO
TM,
VIVE COSMOS
AND
ORIGINAL
HTC
VIVE
TM
IMPORTANT NOTE FROM DESIGNER:
"
INSIST ON GOING CHEAP?
TRY PULLING OUT
ANY
OTHER ADAPTER SET
WHILE YOU GO THROUGH
THE DUST REMOVAL RITUAL (MOST PEOPLE PULL THE LENSES BETWEEN 10-15 TIMES BEFORE ALL DUST PARTICLES ARE REMOVED!!) -
Y
OU
CANNOT
GRIP ANY OTHER ADAPTER WITH YOUR FINGERS!
WITHOUT THE FINGER GRIPS THAT THESE ADAPTERS PROVIDE, YOU WILL HAVE TO USE A METAL SCREWDRIVER, BUTTERKNIFE ETC.  EVERY. SINGLE. TIME"
SOMETIMES, IT'S JUST
NOT
A GOOD IDEA TO GO CHEAP.....
NOTE: NEWLY DESIGNED ADAPTERS ARE A SPECIFIC LEFT AND RIGHT SIDE KIT. ADAPTERS FEATURE GRIP PULLERS TO EASILY REMOVE WHILE
REMOVING DUST DURING YOUR INITIAL INSTALL - OTHER FEATURES INCLUDE O.D. CLINCHER TABS THAT FORM TO THE INNER WALL OF YOUR
HEADSET'S LENS SOCKET CREATING A PERFECT FIT WITHOUT WORRY OF LOOSE ADAPTERS FALLING OUT.  I.D. LENS TABS  HOLD LENSES IN PLACE
MAINTAINING ZERO DEGREE FOCAL POINT CENTER FOCUS  - THE IPD OUTSIDE OF THE
61-73mm
DISTANCE RANGE CAN ALSO BE
ACHIEVED
**ADAPTERS COME IN MATTE BLACK (more colors available soon)
PLEASE MESSAGE ME FOR COLOR SELECTION OR IF YOU WOULD LIKE A DIFFERENT COLOR.
NEW PLA PLUS
LENS ADAPTERS FEATURE UNBREAKABLE LENS TABS THAT NEVER WEAR -
(REMOVE YOUR LENSES
AND
NEVER WORRY ABOUT THE LENS TABS WEARING DOWN, BEING UNABLE TO PROPERLY SEAT AND HOLD THE LENS BACK IN PLACE)
"
DIMENSIONALLY SPEC'ED @ +/- 0.10"
What you get:
2 x Gear VR Lens-compatible Adapters (Wide Inner Radius Design)
What you need:
2x Gear VR Lenses (42mm Biconvex 2016, 2017)
TIPS FOR
AFTER
INSTALLING LENSES INTO ADAPTERS
1. Always use a BLACK "ultra" microfiber cloth for cleaning the lenses - because the black cloth will **reveal even the smallest abrasive particle, granule, etc.
**you will avoid scratching the lenses  - use nothing else and always shake it out before and after every use.
2. Before inserting the new lenses, carefully inspect the inner left and right inner chamber for any particles, debris etc. on the surface of the display screens.
If you notice any FOD (specks, dots, etc) on the screens, use non-freon based canned air, or an air compressor within a coalescing filter inline (to catch moisture from the tank). , etc. If you still notice specks
of dust and/or fine particles while looking through the lenses, remove the lenses again and repeat the process mentioned above until all dust, particles, etc. are no longer visible
(I had to do this 3 times on my first mod 5 times on my 2nd mod because of the dust in the air - This issue is extremely common and will occur most every time)
Hint for success: run a steamy shower and swap your lenses right outside the door - The steam will remove 99% of the dust in the air .
3. Make sure to NOT remove the black gum adhesive trim on the edge of the lens sockets after removing the original lenses.
Sometimes it may get pealed off a bit - that's ok as long as the majority of it is still intact.  This is what holds the lenses on!
4. Invest in a bottle of high quality lens cleaning mist spray (Koala is a great brand) for routine cleaning. Treat your lenses with proper care and they will love you back!
CHECK MY FEEDBACK - BUY WITH CONFIDENCE.
Special Combined Shipping On All Orders.
CHECK MY OTHER LISTINGS FOR MORE GREAT DEALS!
http://www.ebaystores.com/Maladjusted-Graphics
(DCU) PACKAGED IN 100% MOISTURE-PROOF 4 MIL. BAGS
Latest Adapter Socket Tolerance:
ID/OD Tolerance: < 0.010"
Redesign by G&S Composite Inc.
PLEASE READ:
This item is sold " As-Is" - There are no refunds, returns or refunds on this item simply because there are legions of people that cannot perform this simple mod and
end up destroying the kit then expecting a full refund or a free replacement.  If you will not read instructions and following them - please do not purchase.
These are Brand new components sold as a custom-fitted optics upgrade.
Units are built and thoroughly tested contingent upon purchase. Units are sold "as-is" due to possible mishandling, improper installation etc.
Upon purchase, end user agrees to these terms and will not hold seller responsible for any discrepancies with the components listed.
Please watch the install video and read the additional installation tips at the bottom of the page before attempting inst
allation.
Disclaimer/Nomenclature:
"The lens mod kit is considered a custom made optics replacement with a precision dimensional tolerance meeting the common
manufacturing acceptance variable of +/- 0.010"  - After measuring many Vive HMD units, It has been discovered that the
end user consumer-level headset dimensional variance is rarely exact. Commonly, variance has been found to have as
much as (+/- 0.35") in dimensional non-compliance. there may or may not be dimensional non-compliance with your unit,
or rather a non-precision fitment - in all truth,a good fit is considered slightly snug which this kit is designed to be".
"Seller is not responsible for end user installation lens scratches, marks, or any other damages to the lens kit or damage to the host HMD
which can occur if the adapters are installed incorrectly.  Additional information was added to the listing to assure proper installation.
With consideration to the aforementioned manufacturing process and provided installation steps of the host unit
(HTC Vive) lens kit, this custom designed item is sold as a non-warrantied, non-returnable, non-refundable "as-is"  item.
Non-inclusive and exempt of eBay return policies as clearly noted. Upon the buyer taking delivery of the item, under no circumstances
will a return,refund or exchange be granted. The buyer will then be considered in agreement to the no return policy
with a full understanding of it's wording, meaning and logic".
Safety Warnings
Use of the Gear VR lens mod for the HTC Vive are at the sole risk of the user.
The seller is not responsible for injury or conditions incurred with use of this product once installed.
2018 / 2019 Maladjusted Graphics®
"NOT A FAKE REVISION, THIS IS.........
REAL
I
NNOVATIO
N
"