-40%
DGH D1252 4-20mA Input / RS-485 Output Current Input Module - TESTED
DGH D1252 4-20mA Input / RS-485 Output Current Input Module - TESTED
DGH D1252 4-20mA Input / RS-485 Output Current Input Module - TESTED
DGH D1252 4-20mA Input / RS-485 Output Current Input Module - TESTED
DGH D1252 4-20mA Input / RS-485 Output Current Input Module - TESTED
DGH D1252 4-20mA Input / RS-485 Output Current Input Module - TESTED

DGH D1252 4-20mA Input / RS-485 Output Current Input Module - TESTED

$ 67.58

Availability: 100 in stock
  • Condition: Tested. Good Working Modules.
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Interface: RS485
  • Brand: DGH Corporation
  • Model: D1200 Current Input Modules
  • Country/Region of Manufacture: United States
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Controller Platform: Converter Module
  • MPN: D1252

    Description

    Up for sale is
    ONE (1)
    DGH Corporation Output Current Input Module 4-20mA Input / RS-485 Output, Model Number D1252. These modules were pulled from working equipment and are in Great Working Condition. These RS485 Converter Modules
    Retail for 0.00 Each
    and are
    PRICED TO SELL!!
    Here is a description from the manufacturer...
    The D1200 current input modules contain an isolated 15-bit analog to digital converter and measure DC current with full scale input ranges from +/-1mA to +/-1Amp, including 4-20mA. Each module is hardware optimized for the best measurement performance over the full-scale input range. The module performs all signal conditioning, analog to digital conversion and linearizes the digital data into scaled engineering units. Five different current input ranges are available.
    The D1200 current input modules include one discrete digital input and two open-collector digital outputs for monitoring On/Off signals or controlling solid-state relays and annunciators. The digital outputs can also be programmed to operate as HI/LO alarm outputs based on the input current level.
    The digital outputs can be pulled up to +30Vdc and sink up to 30mA without damage. The discrete digital input contains an internal pull up resistor and can accept +/-30Vdc signals without damage. The input switching levels are <+1Vdc = logic “0”, >+3.5Vdc equals a Logic “1”.
    The scaled current values are transmitted to a host computer via an RS-232 or RS-485 serial port.
    FREE DOMESTIC SHIPPING!!
    Please feel free to contact me if you have any questions.
    Thanks for looking and
    GOOD LUCK!!