Universal TEMPERATURE SENSOR TMP36 PCB BOARD

Description

This temperature sensor uses a TMP36 sensor on a breakout board. It has an easy connection port using a 3 pin plug. The sensor also includes the 3 pin connection cable. The PCB was designed and assembled in the USA.
WIRING INSTRUCTIONS
Yellow Wire = 2.7V to 5.5V input
Black Wire  = Vout
Red wire = Ground
FEATURES
Low voltage operation (2.7 V to 5.5 V)
Calibrated directly in °C
10 mV/°C scale factor
±2°C accuracy over temperature (typ)
±0.5°C linearity (typ)
Stable with large capacitive loads
Specified −40°C to +125°C, operation to +150°C
Less than 50 µA quiescent current
Shutdown current 0.5 µA max
Low self-heating
GENERAL DESCRIPTION
The TMP36 are low voltage, precision centigrade temperature sensors. They provide a voltage output that  is linearly proportional to the Celsius (centigrade) temperature. The TMP36 do not require any external calibration to provide typical accuracies of ±1°C at +25°C  and ±2°C over the −40°C to +125°C temperature range.
The low output impedance of the TMP36 and its linear output and precise calibration simplify interfacing to temperature control circuitry and ADCs. All three devices are intended for single-supply operation from 2.7 V to 5.5 V maximum. The supply current runs well below 50 µA, providing very low self-heating—less than 0.1°C in still air. In addition, a shutdown function is provided to cut the supply current to less than 0.5 µA.
The TMP36 is specified from −40°C to +125°C, provides a 750 mV output at 25°C, and operates to 125°C from a single 2.7 V supply.
TMP36 have an output scale factor of 10 mV/°C.
Universal sensors that work with many different types of applications.
Automotive
Aerospace
Marine
Digital Printing
3D Printing
Automation
Environmental control systems
Thermal protection
Industrial process control
Fire alarms Power system monitors
CPU thermal management
Arduino
Raspberry pi